Design Details and Parts
This is a Atlas code 80 setup. The layout can fold up onto the wall when I need room for other things. All the wires are feed between the foam based and the plywood base. Hence the need to use the Atlas switching. The foam base sits on 1/4″ thick x 1″ wide plywood strips, spaced 8″s apart.
The List of the Bits:
- SCARM Layout design software
- (1) ESU ECoS 50210 2.1 central unit
- (1) ESU 50113 ECoS Mobile Control II Remote Control Handset
- (2) ESU 50099 ECoSLink Terminal Bus Distribution
- (1) ESU 50096 CoSDetector Standard feedback module
- (1) ESU 50012 ECoS Boost ext. booster, 7A
- (6) Atlas Master Turnout Controller
- (2) DCC Specialties OG-AR
- (44) Atlas 2500 Flex Track
- (10) Atlas 2532 Re-railer
- (14) Atlas 2536 Bumper
- (1) Atlas 2565 20° Track crossing
- (6) Atlas 2700 LH Remote Switch
- (11) Atlas 2701 RH Remote Switch
- (5) Atlas 2704 #6 LH Remote Switch
- (2) Atlas 2705 #6 RH Remote Switch
- (2) Atlas 2708 Wye Remote Switch
- (1) Atlas 2790 Turntable and 2791 motor
- The Arduino Project for the turntable has it’s own page